10kw solar system connection, complete system parts

Advantage of solar off-grid system
The solar off-grid system is mainly composed of PV modules, solar controller, battery, and off-grid inverter.
Off-grid inverter converts DC into AC to supply the load and the solar controller charges the battery automatically.
The system is featured with advanced technology, safety, reliable performance, energy conservation and environmental
protection, which is widely applied for remote areas where lack mains power,Solar off-grid system suitable for: houses,
factories, islands, communication base stations, border posts etc.

ALLTOP solar system, have off grid and on grid system, single phase and three phase system, protable
DC solar system etc., The various types of systems to meet the diverse needs of customers.


1. Living house and home building
2. Office building, factory and warehouse
3. Home lighting: rural area, islands where lack of electricity, backup power
4. Power station, field operation and some huge engineer construction.


Advantages, the application is very extensive. Green building projects combined with architecture are
increasingly becoming a highlight of urban architecture. Transparent solar modules are used in high-end
art buildings, scenic sightseeing corridors, and photovoltaic glass curtain walls, making urban architecture
a fusion of technology, architecture, and art.
Any interest, please send inquiry to us to get more details.

PRODUCT ATTRIBUTE
Model | DQ1409C1K-01 |
Rated power | 1000w |
Rated DC voltage(v) | 24V |
Line input voltage(v) | 165v-275 |
Line charge current | 30A |
Inverter output | DC/AC Output voltage | 220VAC±5% / 5V 12V |
Output frequency | 50HZ/60HZ±1% |
Wave form | Pure sine wave, THD <4%(Full load) |
Solar input | Maximum voltage(V) | ≥50V |
Rated power(KWP) | 1000 |
Charge current(A) | 20 |
Charge efficiency | 90%-95%, peak on 97% |
Battery | Capacity(AH) | 100AH*2PCS |
Over charge protecttive voltage(v) | 28.4 |
Over charge recover voltage(v) | 27.4 |
Low-voltage protection(v) | 22 |
Over charge recover voltage of battery(v) | 25.2 |
Others | Voltage drop between solar module and battery | ≤0.3V |
Voltage drop between loads and battery(v) | ≤0.15V |
Environment humidity | 0-90% Maximum, non-condensable |
Protetive functions | Protection against anti-charge at night, battery over charge/over discharge protection; Joint-reversed of solar modules |
Control method | PWM |
Proudct size:D*W*H(mm) | 450*410*580 |
Packing size:D*W*H(mm) | 510*470*640 |

Warning
1.Please avoid direct eyes contact to prevent visual damage.
2.The charging and dismantling process must be carried out in a safe place.
3.Please keep this product in a safe and solid location.
4.Do not short-circuit, disassemble; do not put in the water or near the fire.
5.In the absence of professional and technical personnel, do not attempt to repair or replace the battery, the supplier shall not be responsible for any damage of the consequence of replacing or repairing the battery that not conducting by supplier.
NOTE
1. Charge under direct sunlight for 6 to 8 hours.
2. Turn on the switch, before install the lamp.
3. Please choose a position without any shelter for enough sunshine and fully exposure.
4. After turn on the light, first it will flash then light, which is normal.
Using package color inner boxes.
Attached installation manual.
Match installation screw and switch needle.
We use K=K strong white carton outer package.
Printing the product pictures on the boxes.